Hardware comparison

Feature / Devicemoncha.box2Moncha.box 2moncha.go2Moncha.go 2Moncha.lite2Moncha.lite 2upgradeThe Upgrade
Controls Over SoftwareYesYesYesYes
Moncha software supportedYesYesYesYes
Fiesta 5 software supportedYesYesYesYes
Controls Over Art-NetYesYesYesYes
Controls Over DMX512YesNoYes (additional board required)Yes (additional board required)
Controls Over Stand AloneYesYesYesYes
Ethernet port count2110-2 (depends on version)
Ethernet port speed10/100Mbit10/100Mbit10/100Mbit10/100Mbit
Ethernet port connector styleRJ-45RJ-45RJ-452x RJ-45 / optional 2x JST ZH 1.5mm pitch PCB 4pin connectors
ILDA port count111 (integrated)1-6 (integrated)
ILDA output Max scan speed (pps)100.000 pps100.000 pps100.000 pps100.000 pps
ILDA output Axis count2 (X,Y)2 (X,Y)2 (X,Y)2 (X,Y) / optional up to 6*2 (XY)
ILDA output Axis resolution16bit12bit12bit12bit
ILDA output Color outputs count4444
ILDA output Color resolution12bit12bit12bit12bit
ILDA output Shutter signalYesYesYesYes
ILDA output Blank/intensity signalYesYesYesYes
ILDA output connector styleCANNON DB25FCANNON DB25FDual row IDC 26pin MaleJST ZH 1.5mm pitch (6pin for Axis, 8pin for Colors)
DMX512 output/thruDMX output can be THRU or generated by deviceNoOnly with optional DMX board. DMX output can be THRU
or generated by device. Power is required for DMX THRU
Only with optional DMX board. DMX output can be
THRU or generated by device
DMX512 connector styleXLR 3pin (5pin on special request)
DMX output can be THRU or generated by device
NoOnly with optional DMX board. XLR 3pinOnly with optional DMX board. XLR 3pin
SD cardmicro SDmicro SDmicro SDmicro SD
Hardware user interfaceDIP switch, 2 push buttonsNoNoOptional OLED display+Rotary encoder
Software user interfaceWeb browser UIWeb browser UIWeb browser UIWeb browser UI
Status LED count4x LED + 10x LED ILDA status4x LED4x LED3x LED + 1x LED on optional DMX board
Power requirementsAC 85-264V 50/60Hz ~7WDC 5-24V ~4WDC 5-24V ~4W (+1W for DMX board)DC 5-24V ~4W (+1W for DMX board)
Power connector styleNeutrik powercon IN/OUTDC jack 5x2.1mm (positive in middle)Screw terminal blockWire trap for solid wire 0.14-0.35mm2
Other/special functionalities3 units can be screwed together
and mounted as 1U to 19” rack
NoDesigned to be easily installed into even small laser projector.Designed to be easily installed into laser projector.
Can be ordered in several variants. Up to 6 units can
be stacked to provide 6 independent ILDA outputs
for multi scanner laser projectors.
EnclosureSolid metal housing, rack mount optionMiniature metal/Aluminium housingNo enclosure. PCB onlyAluminium front plate only
Dimensions approx.W 142mm / D 105mm / H 43mmW 63mm / D 72mm / H 26mmW 56mm / D 56mm / H 18mmW 90mm / D 54mm / H 20mm
Weight approx.700g160g30g85g
Default accessoriesRack mount brackets with screws,
AC power cable, microSD card,
microSD card USB reader, 1m Ethernet cable
AC/DC power adapter,microSD card,
microSD card USB reader, 1m Ethernet cable
microSD card, microSD card USB reader,
1m Ethernet cable
20cm breakout cable for XY output, 20cm breakout
cable for color/blank/intensity output