DB 25

11 years 3 months ago #106 by admin
DB 25 was created by admin
Moncha uses standard ILDA connector. Here are the pins:

1 X+ /-5 to +5V/
2 Y+ /-5V to +5V/
3 Blanking TTL /0V or +5V/
4, 7 Interlock /inside of device connected together/
5 Red /0V to +5V/
6 Green /0V to +5V/
7 Blue /0V to +5V/
8, 9, 10, 11, 12, 24 Not connected
13 Shutter /0V for blanked, +5V for visible/
14 X- /-5 to +5V/
15 Y- /-5 to +5V/
16,18,19,20,21, 22,23,25 GND

Michal

Please Log in or Create an account to join the conversation.

11 years 3 months ago #107 by carmangary
Replied by carmangary on topic DB 25
I am not currently using the interlock pins. Could you tell me what they are for?

Please Log in or Create an account to join the conversation.

11 years 3 months ago #108 by admin
Replied by admin on topic DB 25
Interlock pins are used for safety reasons. Some lasers might have protection - if the interlock pins are NOT shorted, the laser won't run(it means, no signal cable is connected to laser).

Michal

Please Log in or Create an account to join the conversation.

Moderators: mystery
Time to create page: 0.375 seconds
Powered by Kunena Forum